Jump to content
Server time (UTC): 2020-11-25, 02:32
Sign in to follow this  
Cube

Can't join

Recommended Posts

I have been whitelisted but when I try to join the standalone server, it will tell me that i'm not

Share this post


Link to post

/Moving to Troubleshooting

Share this post


Link to post

http://www.dayzrp.com/whitelist

Look here to see if you have filled out the GUID for SA. If not put it in the text box which is empty.

Share this post


Link to post

http://www.dayzrp.com/whitelist

Look here to see if you have filled out the GUID for SA. If not put it in the text box which is empty.

It says that I've been whitelisted for DayZRP Standalone with the following GUID: blah blah...

But there still is another empty box which says The Whitelist system requires your GUID, please enter it below.

I don't know what to do.

Share this post


Link to post

http://www.dayzrp.com/whitelist

Look here to see if you have filled out the GUID for SA. If not put it in the text box which is empty.

It says that I've been whitelisted for DayZRP Standalone with the following GUID: blah blah...

But there still is another empty box which says The Whitelist system requires your GUID, please enter it below.

I don't know what to do.

Enter your GUID in that box also.

Share this post


Link to post

http://www.dayzrp.com/whitelist

Look here to see if you have filled out the GUID for SA. If not put it in the text box which is empty.

It says that I've been whitelisted for DayZRP Standalone with the following GUID: blah blah...

But there still is another empty box which says The Whitelist system requires your GUID, please enter it below.

I don't know what to do.

Enter your GUID in that box also.

Well, I never entered the other GUID, and I don't know where to find it. Tried to join a server but the GUID goes too fast by.

Share this post


Link to post

Well, I never entered the other GUID, and I don't know where to find it. Tried to join a server but the GUID goes too fast by.

When you join a DayZ Standalone server type in Direct Communications: #beclient. This should make your GUID visible, take a screenshot of it or write it down and then enter it in the empty box.

Share this post


Link to post

Well, I never entered the other GUID, and I don't know where to find it. Tried to join a server but the GUID goes too fast by.

When you join a DayZ Standalone server type in Direct Communications: #beclient. This should make your GUID visible, take a screenshot of it or write it down and then enter it in the empty box.

All right I wrote the GUID to the empty box and it says that it's whitelisted for DayZRP mod, and the standalone one is still wrong..

Share this post


Link to post

Does the GUID that you just found from pat's method match exactly with your standalone GUID?

Share this post


Link to post

Does the GUID that you just found from pat's method match exactly with your standalone GUID?

No it does not, I can't change it.

Share this post


Link to post
http://www.dayzrp.com/t-need-a-guid-or-pid-reset-post-here Post on this thread, and ask for a Standalone GUID reset. It will take no more then a few hours for this to happen. From there, put the GUID you found from pat's method into the now blank SA GUID box. After that, both of your GUID's should match, and you should be able to get into the server.

Share this post


Link to post

http://www.dayzrp.com/t-need-a-guid-or-pid-reset-post-here Post on this thread, and ask for a Standalone GUID reset. It will take no more then a few hours for this to happen. From there, put the GUID you found from pat's method into the now blank SA GUID box. After that, both of your GUID's should match, and you should be able to get into the server.

Thanks, you're the best staff ever :)

Share this post


Link to post

Your GUID has been reset.

Re-enter the GUID in the whitelist tab

/solved

Share this post


Link to post
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...